Details

---

BUY ISO721D https://www.utsource.net/itm/p/12609800.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VDD	2.25	-	5.5	V
Supply Current per Channel	ICC	-	300	-	渭A	VDD = 3.3V, TA = 25掳C
Input Voltage Range	VIH/VIL	-	-	-	V	0 to VDD
Output Voltage High	VOH	-	-	VDD-0.4	V	IL = 4 mA, VDD = 5V, TA = 25掳C
Output Voltage Low	VOL	0.4	-	-	V	IL = 8 mA, VDD = 5V, TA = 25掳C
Propagation Delay Time	tPD	-	25	-	ns	VDD = 5V, TA = 25掳C
Maximum Data Rate	fMAX	-	-	100	MHz	VDD = 5V, TA = 25掳C
Common-Mode Transient Immunity (CMTI)	CMTI	-	25	-	kV/渭s	VDD = 5V, TA = 25掳C
Isolation Voltage	VIORM	-	-	5000	VRMS	Continuous
Operating Temperature	TA	-40	-	125	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 2.25V to 5.5V.
   • Connect the power supply to the VDD and GND pins.

2. Signal Inputs:

   • The input signals should be within the range of 0V to VDD.
   • Connect the input signals to the appropriate input pins (IN1, IN2, etc.).

3. Signal Outputs:

   • The output signals will be high (VOH) or low (VOL) depending on the input logic levels.
   • Ensure the load current does not exceed the specified limits for VOH and VOL.

4. Propagation Delay:

   • The propagation delay time (tPD) is typically 25 ns at VDD = 5V and TA = 25掳C.
   • Consider this delay when designing your circuit to ensure proper timing.

5. Isolation:

   • The device provides isolation up to 5000 VRMS.
   • Ensure that the common-mode transient immunity (CMTI) is considered in noisy environments.

6. Temperature:

   • The device operates over a temperature range of -40掳C to 125掳C.
   • Ensure the operating environment does not exceed these limits.

7. Data Rate:

   • The maximum data rate (fMAX) is 100 MHz at VDD = 5V and TA = 25掳C.
   • Ensure the signal frequency does not exceed this limit to avoid data corruption.

8. Common-Mode Transient Immunity (CMTI):

   • The device has a CMTI of 25 kV/渭s, which helps in maintaining signal integrity in the presence of fast transients.

9. Storage and Handling:

   • Store the device in a dry, static-free environment.
   • Handle with care to avoid damage to the pins and internal components.

(For reference only)