Details

---

BUY TC74HC132P https://www.utsource.net/itm/p/12609802.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	VCC	Operating	2.0	-	6.0	V
Input Low Voltage	VIL	VCC = 4.5V to 5.5V	0.8	-	-	V
Input High Voltage	VIH	VCC = 4.5V to 5.5V	-	-	2.0	V
Output Low Voltage	VOL	IOL = 4mA, VCC = 4.5V to 5.5V	0.1	-	0.4	V
Output High Voltage	VOH	IOH = -4mA, VCC = 4.5V to 5.5V	2.4	-	2.7	V
Propagation Delay Time (Typical)	tpd	VCC = 5V, TA = 25掳C	-	9	-	ns
Power Dissipation	PD	Continuous	-	-	100	mW
Operating Temperature Range	TA	-	-40	-	85	掳C
Storage Temperature Range	TSTG	-	-65	-	150	掳C

Instructions for Using TC74HC132P

1. Supply Voltage:

   • Ensure the supply voltage (V_CC) is within the range of 2.0V to 6.0V to avoid damage to the device.

2. Input Levels:

   • For reliable operation, input low voltage (V_IL) should be below 0.8V and input high voltage (V_IH) should be above 2.0V when V_CC is between 4.5V and 5.5V.

3. Output Levels:

   • The output low voltage (V_OL) should not exceed 0.4V under a load current of 4mA.
   • The output high voltage (V_OH) should be at least 2.4V under a load current of -4mA.

4. Propagation Delay:

   • The typical propagation delay time (t_pd) is 9ns at V_CC = 5V and T_A = 25掳C.

5. Power Dissipation:

   • The maximum power dissipation (P_D) is 100mW. Ensure proper heat dissipation if operating near this limit.

6. Temperature Ranges:

   • The operating temperature range (T_A) is from -40掳C to 85掳C.
   • The storage temperature range (T_STG) is from -65掳C to 150掳C.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Use appropriate ESD protection measures during handling and installation.

8. Mounting:

   • Ensure proper mounting and soldering techniques to avoid mechanical stress on the device.
   • Follow the recommended PCB layout guidelines for optimal performance and reliability.

(For reference only)