Details

---

BUY BUK7K13-60EX https://www.utsource.net/itm/p/12609804.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Input Voltage	V_IN	4.5	-	60	V
Output Current	I_OUT	-	13	20	A	At 25掳C
Junction Temperature	T_J	-40	-	150	掳C
Storage Temperature	T_STG	-55	-	150	掳C
Power Dissipation	P_D	-	-	108	W	At T_C = 25掳C, 胃_JA = 5.7掳C/W
Thermal Resistance	胃_JA	-	5.7	-	掳C/W

Instructions for BUK7K13-60EX:

1. Installation:

   • Ensure that the component is soldered onto the PCB with proper alignment and orientation.
   • Follow recommended soldering profiles to avoid thermal damage.

2. Power Supply:

   • The input voltage should be within the specified range of 4.5V to 60V.
   • Ensure stable power supply to prevent transient overvoltages which can damage the device.

3. Heat Management:

   • Adequate heat sinking is essential to maintain the junction temperature below 150掳C.
   • Use thermal paste between the heatsink and the device for better thermal conductivity.

4. Current Handling:

   • Do not exceed the maximum output current of 20A to avoid overheating and potential failure.
   • For continuous operation, keep the output current around the typical value of 13A.

5. Storage:

   • Store in a dry environment with temperatures between -55掳C and 150掳C.
   • Protect from electrostatic discharge (ESD) during handling and storage.

6. Operational Environment:

   • Avoid operating in environments with excessive dust, moisture, or corrosive gases.
   • Ensure proper ventilation to dissipate heat effectively.

7. Testing:

   • Before full-scale deployment, test the device under actual load conditions to ensure reliability.
   • Monitor temperature and performance parameters during testing.

8. Compliance:

   • Verify that the application complies with all relevant safety and regulatory standards.
   • Check for any updates or revisions to the datasheet provided by the manufacturer.

(For reference only)