Details

---

BUY M1661 https://www.utsource.net/itm/p/12609805.html

Parameter	Description	Value
Part Number	M1661	-
Type	Diode	-
Function	High-speed switching diode	-
Maximum Reverse Voltage (V_R)	Maximum voltage that can be applied in reverse direction without breakdown	600 V
Maximum Forward Current (I_F)	Maximum current that can flow through the diode in forward direction	1 A
Peak Reverse Current (I_RM)	Maximum peak reverse current the diode can handle	25 A
Forward Voltage (V_F)	Voltage drop across the diode when conducting in the forward direction at a specified current	1.1 V @ 1 A
Reverse Recovery Time (t_rr)	Time it takes for the diode to switch from forward to reverse conduction	35 ns
Operating Temperature Range (T_op)	Temperature range over which the diode is designed to operate	-55掳C to 150掳C
Storage Temperature Range (T_stg)	Temperature range over which the diode can be stored without damage	-65掳C to 175掳C
Package Type	Physical package type	DO-204AB
Mounting Type	Method of mounting the component	Through-hole

Instructions for Use:

1. Handling:

   • Handle the diode with care to avoid mechanical stress.
   • Use proper ESD (Electrostatic Discharge) protection to prevent damage.

2. Soldering:

   • Solder the diode at a temperature not exceeding 260掳C for no more than 10 seconds.
   • Allow the diode to cool naturally after soldering to avoid thermal shock.

3. Circuit Design:

   • Ensure the circuit design does not exceed the maximum ratings specified.
   • Use appropriate heat sinks if the diode will be operating near its maximum power dissipation.

4. Testing:

   • Test the diode using a multimeter or diode tester to ensure it is functioning correctly.
   • Check for proper forward and reverse characteristics.

5. Storage:

   • Store the diode in a dry, cool place to prevent moisture damage.
   • Keep the diode away from direct sunlight and high temperatures.

6. Troubleshooting:

   • If the diode fails, check for overvoltage, overcurrent, or excessive temperature conditions.
   • Replace the diode if it is found to be defective.

(For reference only)