Details

---

BUY V23084-C2001-A303 https://www.utsource.net/itm/p/12609834.html

Parameter	Value
Part Number	V23084-C2001-A303
Type	Voltage Regulator
Input Voltage Range	2.7V to 5.5V
Output Voltage	3.3V
Output Current	500mA
Quiescent Current	10渭A (typical)
Dropout Voltage	120mV (typical)
Operating Temperature	-40掳C to +85掳C
Package Type	SOT-23
Pin Configuration	IN, OUT, GND
Protection Features	Overcurrent, Thermal Shutdown

Instructions:

1. Mounting:

   • Ensure the PCB layout follows the recommended guidelines for thermal performance.
   • Place the component on the PCB with the correct orientation as indicated by the pin configuration.

2. Power Supply:

   • Connect the input pin (IN) to the power supply within the specified input voltage range.
   • Connect the output pin (OUT) to the load or circuit requiring regulated voltage.
   • Ground the GND pin to the common ground of the system.

3. Capacitors:

   • Use a 1渭F ceramic capacitor between the IN and GND pins for input filtering.
   • Use a 1渭F ceramic capacitor between the OUT and GND pins for output stability.
   • Place these capacitors as close as possible to the regulator to minimize parasitic inductance.

4. Thermal Management:

   • If operating at high current or in high ambient temperatures, ensure adequate heat dissipation.
   • Consider using a heatsink or thermal pad if necessary.

5. Protection:

   • The device includes overcurrent and thermal shutdown protection. However, avoid prolonged operation under fault conditions to prevent damage.

6. Storage:

   • Store the component in a dry, static-free environment to prevent damage.

7. Testing:

   • Before final assembly, test the regulator with a known load to ensure it meets the required specifications.

8. Compliance:

   • Ensure that the application complies with relevant safety and regulatory standards.

(For reference only)