Details

---

BUY C1701C https://www.utsource.net/itm/p/12609841.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	4.5	5	5.5	V	Operating voltage range
Input High Voltage	VIH	3.15	-	5.25	V	Minimum input high level
Input Low Voltage	VIL	0	-	1.85	V	Maximum input low level
Output High Voltage	VOH	2.4	-	VDD-0.4	V	Minimum output high level
Output Low Voltage	VOL	0	-	0.4	V	Maximum output low level
Input Current	IIH	-1	-	20	渭A	Input current at high level
Input Current	IIL	-20	-	1	渭A	Input current at low level
Output Current (High)	IOH	-	-	16	mA	Maximum output current at high level
Output Current (Low)	IOL	-	-	-16	mA	Maximum output current at low level
Propagation Delay	tpd	-	10	15	ns	Typical propagation delay time
Power Dissipation	PD	-	-	100	mW	Maximum power dissipation

Instructions for Using C1701C:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the specified range of 4.5V to 5.5V.
   • Use a stable power source to avoid fluctuations that could affect performance.

2. Input Signals:

   • For a valid high input (VIH), the voltage should be between 3.15V and 5.25V.
   • For a valid low input (VIL), the voltage should be between 0V and 1.85V.
   • Keep input currents within the specified limits to avoid damage.

3. Output Signals:

   • The output high voltage (VOH) should be at least 2.4V and can go up to VDD - 0.4V.
   • The output low voltage (VOL) should not exceed 0.4V.
   • Ensure the load connected to the output does not draw more than the maximum output current (IOH for high, IOL for low).

4. Timing:

   • The typical propagation delay (tpd) is 10ns with a maximum of 15ns. This is the time it takes for the output to respond to a change in input.

5. Power Management:

   • The maximum power dissipation (PD) is 100mW. Ensure proper heat dissipation if operating near this limit.

6. Handling:

   • Handle the C1701C with care to avoid static discharge, which can damage the component.
   • Store in a dry, cool environment to prevent moisture damage.

7. Testing:

   • Before integrating the C1701C into a circuit, test it using a known good setup to ensure it meets the specified parameters.

8. Documentation:

   • Refer to the datasheet for detailed information and specific application notes.

(For reference only)