Details

---

BUY MMBD1505A https://www.utsource.net/itm/p/12609851.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Collector-Emitter Voltage	VCEO	IC = 0	-	-	30	V
Emitter-Collector Voltage	VECS	IC = 0	-	-	30	V
Collector-Base Voltage	VCBO	IB = 0	-	-	40	V
Base-Emitter Voltage	VBE	IC = 5 mA, IE = 0	-2	-	2	V
Continuous Collector Current	IC	Tc = 25掳C	-	150	-	mA
Total Device Dissipation	Ptot	Tc = 25掳C	-	-	625	mW
Junction Temperature	Tj	-	-	-	150	掳C
Storage Temperature Range	Tstg	-	-55	-	150	掳C

Instructions for Use:

1. Mounting:

   • Ensure that the device is mounted on a PCB with adequate heat dissipation to maintain the junction temperature within specified limits.
   • Use appropriate mounting techniques to avoid mechanical stress on the leads.

2. Electrical Connections:

   • Connect the collector (C), base (B), and emitter (E) terminals correctly according to the circuit diagram.
   • Ensure that the polarity is correct to avoid damage to the device.

3. Operating Conditions:

   • Do not exceed the maximum ratings for voltage and current as specified in the table.
   • Operate the device within the recommended temperature range to ensure reliable performance.

4. Handling:

   • Handle the device with care to avoid static discharge, which can damage the semiconductor.
   • Use proper anti-static precautions when handling and storing the device.

5. Testing:

   • When testing the device, use a suitable test setup that does not exceed the maximum ratings.
   • Verify the device parameters using a multimeter or other appropriate testing equipment.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the device in its original packaging until ready for use to protect it from environmental factors.

(For reference only)