Details

---

BUY BT155W-1200T https://www.utsource.net/itm/p/12609856.html

Parameter	Symbol	Min	Typ	Max	Unit
Rated On-State Current	IT(RMS)	-	16	-	A
Peak On-State Current	ITSM	-	32	-	A
On-State Voltage	VT	-	1.2	-	V
Holding Current	IH	-	5	-	mA
Gate Trigger Current	IG(T)	-	5	-	mA
Maximum Off-State Voltage	VDRM	-	1200	-	V
Maximum Repetitive Peak	VRRM	-	1200	-	V
Power Dissipation	PD	-	150	-	W
Operating Temperature	Tj	-40	-	125	掳C
Storage Temperature	Tstg	-40	-	125	掳C

Instructions for BT155W-1200T

1. Mounting and Handling:

   • Handle the device with care to avoid mechanical damage.
   • Ensure proper mounting to a heatsink if operating near maximum power dissipation.

2. Electrical Connections:

   • Connect the anode (A), cathode (K), and gate (G) terminals correctly.
   • Use appropriate wire gauges to handle the rated currents.

3. Operating Conditions:

   • Do not exceed the maximum ratings listed in the parameter table.
   • Ensure the junction temperature (Tj) remains within the specified range to prevent thermal runaway.

4. Gate Triggering:

   • Apply a sufficient gate trigger current (IG(T)) to ensure reliable turn-on.
   • The gate trigger current should be at least 5 mA for reliable operation.

5. Heat Management:

   • Use a suitable heatsink to manage heat dissipation, especially when operating at high currents or in high ambient temperatures.
   • Ensure adequate airflow around the device to enhance cooling.

6. Storage:

   • Store the device in a dry, cool place within the storage temperature range (-40掳C to 125掳C).

7. Testing:

   • Before installing the device in a circuit, test it under controlled conditions to verify its performance parameters.

8. Safety Precautions:

   • Follow all safety guidelines when handling high-voltage and high-current circuits.
   • Use appropriate personal protective equipment (PPE) during testing and installation.

By adhering to these instructions, you can ensure the reliable and safe operation of the BT155W-1200T triac.

(For reference only)