Details

---

BUY ICL3243ECAZ https://www.utsource.net/itm/p/12609868.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VCC)	Operating supply voltage range	4.5	-	18	V
Supply Current (ICC)	Quiescent current per amplifier	-	0.06	-	mA
Input Voltage Range	Range over which inputs can be operated without damage	0	-	VCC	V
Output Voltage Swing	Output voltage swing with respect to ground	0.01	-	VCC - 0.01	V
Common-Mode Rejection Ratio (CMRR)	Measure of the ability to reject common-mode signals	75	-	-	dB
Power Supply Rejection Ratio (PSRR)	Measure of the ability to reject power supply variations	75	-	-	dB
Slew Rate	Rate at which the output voltage changes in response to a step input	0.3	-	-	V/渭s
Bandwidth (GBW)	Gain-bandwidth product	1.2	-	-	MHz
Input Offset Voltage	Maximum difference between the two input terminals	-	5	-	mV
Input Bias Current	Average current flowing into the input terminals	-	50	-	nA
Input Impedance	Resistance presented by the input terminals	-	10^12	-	惟
Output Short-Circuit Duration	Time the output can be short-circuited without damage	Continuous	-	-	s
Operating Temperature Range	Range of temperatures over which the device is specified to operate	-40	-	85	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the specified range (4.5V to 18V).
   • Connect the positive supply to VCC and the negative supply to GND.

2. Input Signals:

   • Input signals should be within the range of 0V to VCC to avoid damage.
   • Ensure that the input bias current is accounted for in the circuit design.

3. Output Configuration:

   • The output voltage swing is from 0.01V to VCC - 0.01V. Design the load to accommodate this range.
   • The output can be short-circuited continuously without damaging the device.

4. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 85掳C to ensure reliable performance.

5. Stability and Performance:

   • To maintain stability, use appropriate feedback resistors and capacitors as needed.
   • Consider the CMRR and PSRR when designing circuits to minimize the impact of common-mode signals and power supply variations.

6. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store in a dry, cool place to prevent moisture damage.

7. Testing:

   • Before finalizing the design, test the circuit under various conditions to ensure it meets the required specifications.

(For reference only)