Details

---

BUY GA200SA60UP https://www.utsource.net/itm/p/12609872.html

Parameter	Description
Part Number	GA200SA60UP
Type	Inverter
Output Power	200 W
Input Voltage Range	18 VDC to 60 VDC
Output Voltage	230 VAC (卤5%)
Frequency	50/60 Hz (Selectable)
Efficiency	Up to 90%
Protection Features	Overload, short circuit, overvoltage, undervoltage, overheating protection
Operating Temperature	-20掳C to +60掳C
Storage Temperature	-40掳C to +85掳C
Humidity	0% to 95% RH (non-condensing)
Dimensions (W x H x D)	170 mm x 50 mm x 130 mm
Weight	0.8 kg

Instructions:

1. Installation:

   • Ensure the inverter is installed in a well-ventilated area.
   • Secure the unit using the mounting holes provided.

2. Connecting Input Power:

   • Connect the DC input cables to the battery or power source ensuring correct polarity.

3. Connecting Load:

   • Connect the AC output cables to the load device ensuring the inverter is switched off during connection.

4. Operation:

   • Turn on the inverter by pressing the ON/OFF button.
   • Select the desired frequency (50/60 Hz) using the selector switch if applicable.

5. Safety Precautions:

   • Do not operate the inverter in environments with flammable gases or vapors.
   • Avoid exposing the inverter to water or moisture.
   • Disconnect the inverter from the power source before performing any maintenance or cleaning.

6. Troubleshooting:

   • If the inverter fails to start, check the connections and ensure the input voltage is within the specified range.
   • For persistent issues, refer to the detailed troubleshooting section in the user manual or contact technical support.

(For reference only)