Details

---

BUY SN65HVD1782DG4 https://www.utsource.net/itm/p/12609880.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	4.5		5.5	V
Differential Output Voltage	VOD	No Load	0.8		1.2	V
Common-Mode Output Voltage	VOCM	No Load	2.2		2.8	V
Propagation Delay	tPD	RL = 60 惟, VCM = 2.5V		35		ns
Rise Time	tr	RL = 60 惟, VCM = 2.5V		10		ns
Fall Time	tf	RL = 60 惟, VCM = 2.5V		10		ns
Input High Voltage Level	VIH	IIN = -4 渭A	2.0		5.5	V
Input Low Voltage Level	VIL	IIN = 1 渭A	0		0.8	V
Output Current (Source)	IOH	VOUT = 2.4V		4		mA
Output Current (Sink)	IOL	VOUT = 2.6V		-4		mA

Instructions for SN65HVD1782DG4:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the operating range of 4.5V to 5.5V.

2. Signal Levels:

   • For proper operation, maintain input high voltage (VIH) above 2.0V and input low voltage (VIL) below 0.8V.

3. Output Characteristics:

   • The differential output voltage (VOD) should ideally be between 0.8V and 1.2V under no load conditions.
   • The common-mode output voltage (VOCM) should be maintained between 2.2V and 2.8V under no load conditions.

4. Timing Parameters:

   • Monitor propagation delay (tPD), rise time (tr), and fall time (tf) to ensure they meet the specified typical values when using a load resistance (RL) of 60惟 and common-mode voltage (VCM) of 2.5V.

5. Current Handling:

   • The device can source or sink up to 卤4mA at the specified output voltages.

6. Installation and Usage:

   • Ensure all connections are secure and free from short circuits.
   • Use appropriate decoupling capacitors near the power supply pins to stabilize the supply voltage and reduce noise.
   • Follow PCB layout guidelines to minimize signal reflections and crosstalk.

7. Operating Environment:

   • Operate within the temperature range specified in the datasheet to avoid damage or malfunction.
   • Protect against electrostatic discharge (ESD) during handling and installation.

Refer to the full datasheet for more detailed specifications and application notes.

(For reference only)