Details

---

BUY TD62783AFN https://www.utsource.net/itm/p/12609885.html

Below is the parameter table and instructions for the TD62783AFN:

Parameter Table

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	4.5	-	18	V
Quiescent Current (Vcc=5V)	Icc	-	3.0	-	mA
Output Current per Channel	Io	-	150	200	mA
Maximum Power Dissipation	Pd	-	1250	-	mW
Operating Temperature	Ta	-40	-	85	掳C
Storage Temperature	Tstg	-55	-	150	掳C
Junction Temperature	Tj	-40	-	150	掳C
Thermal Resistance (胃ja)	胃ja	-	125	-	掳C/W

Instructions

1. Supply Voltage:

   • The TD62783AFN can operate with a supply voltage ranging from 4.5V to 18V. Ensure that the supply voltage is within this range to avoid damage to the device.

2. Quiescent Current:

   • The quiescent current at a supply voltage of 5V is typically 3.0mA. This value may vary slightly depending on the operating conditions.

3. Output Current per Channel:

   • Each output channel can source up to 150mA continuously and can handle peak currents up to 200mA. Ensure that the load connected to each channel does not exceed these limits.

4. Maximum Power Dissipation:

   • The maximum power dissipation of the device is 1250mW. Proper heat sinking or cooling may be required if the device is operating near this limit to prevent overheating.

5. Operating Temperature:

   • The device is designed to operate in ambient temperatures ranging from -40掳C to 85掳C. Ensure that the operating environment is within this temperature range.

6. Storage Temperature:

   • The device can be stored in temperatures ranging from -55掳C to 150掳C. However, prolonged exposure to extreme temperatures may affect the performance and reliability of the device.

7. Junction Temperature:

   • The junction temperature should not exceed 150掳C. Monitor the junction temperature to ensure it remains within safe limits, especially under high power dissipation conditions.

8. Thermal Resistance:

   • The thermal resistance from the junction to the ambient (胃ja) is 125掳C/W. Use this value to calculate the necessary heat sink size or cooling requirements to keep the junction temperature within safe limits.

Additional Notes:

• Always refer to the datasheet for the most accurate and detailed information.
• Ensure proper PCB layout and grounding to minimize noise and interference.
• Use appropriate decoupling capacitors close to the power pins to stabilize the supply voltage and reduce transient effects.

If you have any specific questions or need further details, feel free to ask!

(For reference only)