Details

---

BUY UC3854ADW https://www.utsource.net/itm/p/12609891.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Operating	15	-	40	V
Switching Frequency	fSW		20	100	500	kHz
Output Current Limit	IOLIM		0.1	-	5	A
Reference Voltage	VREF		2.5	-	2.5	V
Start-Up Current	ISU		10	-	30	渭A
Shutdown Current	ISD		0.1	-	0.5	渭A
Error Amplifier Transconductance	GT		10	-	20	渭S
Soft-Start Time	TSS		0.6	-	1.2	ms

Instructions for UC3854ADW

1. Power Supply Connection:

   • Connect the input voltage (VIN) within the specified range of 15V to 40V.

2. Frequency Setting:

   • Set the switching frequency using an external resistor and capacitor according to the desired operating frequency between 20kHz and 500kHz.

3. Output Current Limitation:

   • Adjust the output current limit by setting the appropriate resistance value in the circuit to ensure it does not exceed 5A.

4. Reference Voltage:

   • The internal reference voltage is fixed at 2.5V, which can be used as a stable voltage reference for other components in the circuit.

5. Start-Up and Shutdown:

   • Ensure the start-up current is within the 10渭A to 30渭A range to properly initialize the device.
   • During shutdown, the current should be limited to 0.1渭A to 0.5渭A to minimize power consumption.

6. Error Amplifier Configuration:

   • Configure the error amplifier transconductance to optimize the response time and stability of the control loop.

7. Soft-Start Feature:

   • Utilize the soft-start feature to gradually increase the output voltage over a period of 0.6ms to 1.2ms to prevent inrush currents during startup.

8. Protection Circuits:

   • Implement necessary protection circuits such as overcurrent protection and thermal shutdown to safeguard the IC under fault conditions.

9. PCB Layout Considerations:

   • Follow good PCB layout practices to minimize noise and interference, ensuring reliable operation of the UC3854ADW.

(For reference only)