Details

---

BUY BYT08PI-200 https://www.utsource.net/itm/p/12609895.html

Parameter	Symbol	Min	Typical	Max	Unit	Description
Input Voltage	VIN	6	-	40	V	Operating input voltage range
Output Voltage	VOUT	5	-	12	V	Adjustable output voltage
Output Current	IOUT	-	200	-	mA	Maximum continuous output current
Quiescent Current	IQ	-	10	-	渭A	Supply current at no load
Dropout Voltage	VD	-	0.3	-	V	Voltage difference between VIN and VOUT at IOUT = 200mA
Line Regulation	-	-	0.01	-	%/V	Change in output voltage per unit change in input voltage
Load Regulation	-	-	0.05	-	%/mA	Change in output voltage per unit change in output current
Ripple Rejection	-	-	70	-	dB	Attenuation of input ripple to output
Operating Temp.	TOPR	-40	-	85	掳C	Operating temperature range
Storage Temp.	TSTG	-65	-	150	掳C	Storage temperature range

Instructions for Use:

1. Input Connection:

   • Connect the positive terminal of the input voltage to the VIN pin.
   • Connect the negative terminal of the input voltage to the GND pin.

2. Output Configuration:

   • Connect the VOUT pin to the load or circuit requiring regulated power.
   • Ensure the load does not exceed the maximum output current of 200 mA.

3. Adjusting Output Voltage:

   • The output voltage can be adjusted using an external resistor network connected to the ADJ pin.
   • Refer to the datasheet for specific resistor values and configurations.

4. Thermal Considerations:

   • Ensure adequate heat dissipation if operating near the maximum output current, especially at higher ambient temperatures.
   • Use a heatsink if necessary to maintain the device within its operating temperature range.

5. Capacitors:

   • Use a 1 渭F ceramic capacitor between VIN and GND for input filtering.
   • Use a 1 渭F ceramic capacitor between VOUT and GND for output stability.

6. Storage and Handling:

   • Store the device in a dry, cool environment within the specified storage temperature range.
   • Handle with care to avoid damage from electrostatic discharge (ESD).

7. Safety Precautions:

   • Do not exceed the maximum ratings specified in the table.
   • Ensure proper grounding and isolation to prevent electrical hazards.

(For reference only)