Details

---

BUY M51565P https://www.utsource.net/itm/p/12609904.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD		2.7		5.5	V
Standby Current	ISB	VDD = 3.0V		1		渭A
Operating Current	IOP	VDD = 3.0V, fosc = 4MHz		1.8		mA
Oscillation Frequency	fosc			4		MHz
Output High Level	VOH	VDD = 3.0V	2.4			V
Output Low Level	VOL	VDD = 3.0V			0.4	V
Input Leakage Current	IIH	VIN = VDD	-1		1	渭A
Output Leakage Current	IOZ	VOUT = VDD/2	-1		1	渭A

Instructions for M51565P

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V.
   • Use a stable power source to avoid fluctuations that can affect performance.

2. Oscillator Configuration:

   • The device operates with an internal oscillator set at 4 MHz.
   • External crystal or ceramic resonators are not required for this frequency.

3. Current Consumption:

   • Monitor standby and operating currents to ensure they do not exceed typical values under specified conditions.
   • Optimize power consumption by managing active and sleep modes effectively.

4. Signal Levels:

   • Verify input signals do not exceed VDD or go below ground to prevent damage.
   • Ensure output signals meet VOH and VOL specifications for reliable operation.

5. Handling Precautions:

   • Handle the component with care to avoid electrostatic discharge (ESD).
   • Follow standard anti-static precautions when soldering or handling the device.

6. Storage and Environment:

   • Store in a dry environment to prevent moisture damage.
   • Avoid exposure to extreme temperatures outside operational limits.

(For reference only)