Details

---

BUY UPC2415AHF https://www.utsource.net/itm/p/12609907.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	VCC	Operating Range	4.5	-	5.5	V
Output Current	IOUT	Continuous	-	100	-	mA
Quiescent Current	IQ	No Load	-	1.5	-	mA
Output Voltage Drop	VDROP	IOUT = 100mA	-	0.3	-	V
Thermal Shutdown Temperature	TSD	-	-	160	-	掳C
Storage Temperature	TSTG	-	-40	-	85	掳C

Instructions for Use:

1. Supply Voltage:

   • Ensure the supply voltage (V_CC) is within the operating range of 4.5V to 5.5V.
   • Avoid exceeding these limits to prevent damage to the device.

2. Output Current:

   • The device can provide up to 100mA continuously. Do not exceed this current to avoid overheating or damage.
   • For higher currents, consider using external components or a different device.

3. Quiescent Current:

   • The quiescent current (I_Q) is typically 1.5mA when there is no load. This is important for power budgeting in low-power applications.

4. Output Voltage Drop:

   • The output voltage drop (V_DROP) is typically 0.3V at a load current of 100mA. This should be considered when designing the circuit to ensure the output voltage meets the required specifications.

5. Thermal Shutdown:

   • The device has thermal shutdown protection that activates at approximately 160掳C. Ensure proper heat dissipation to prevent the device from reaching this temperature.

6. Storage Temperature:

   • Store the device in an environment with temperatures ranging from -40掳C to 85掳C to maintain its reliability and performance.

7. Mounting and Handling:

   • Handle the device with care to avoid mechanical stress or damage.
   • Follow standard ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

8. Circuit Design:

   • Use appropriate decoupling capacitors near the power supply pins to filter out noise and ensure stable operation.
   • Ensure all connections are secure and free from shorts or open circuits.

9. Testing:

   • Test the device under typical operating conditions to verify its performance before integrating it into a larger system.

(For reference only)