Details

---

BUY MTP12P06 W https://www.utsource.net/itm/p/12609940.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Drain-Source Voltage	VDS	-	600	-	V	-
Gate-Source Voltage	VGS	-15	-	20	V	-
Continuous Drain Current	ID	-	12	-	A	TC = 25掳C
Pulse Drain Current	IDpeak	-	48	-	A	tp = 10 ms, TC = 25掳C
Power Dissipation	PTOT	-	-	125	W	TC = 25掳C
Junction Temperature	TJ	-	-	175	掳C	-
Storage Temperature	TSTG	-55	-	150	掳C	-
Total Gate Charge	QG	-	110	-	nC	VGS = 15V
Input Capacitance	Ciss	-	3000	-	pF	VDS = 400V
Output Capacitance	Coss	-	390	-	pF	VDS = 400V
Reverse Transfer Capacitance	Crss	-	220	-	pF	VDS = 400V
On-State Resistance	RDS(on)	-	0.55	-	惟	VGS = 10V, ID = 12A
Threshold Voltage	VGS(th)	2.0	4.0	6.0	V	ID = 1mA

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper handling to avoid damage to the device.
   • Use appropriate thermal management techniques to keep the junction temperature within specified limits.

2. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Ensure that the gate-source voltage (V_GS) does not exceed the maximum rating of 卤20V.

3. Thermal Management:

   • Use a heatsink or other cooling methods to manage power dissipation and maintain the junction temperature below 175掳C.
   • Ensure adequate airflow or forced cooling if operating at high power levels.

4. Operating Conditions:

   • Do not exceed the continuous drain current (I_D) of 12A at 25掳C case temperature.
   • For pulse operations, ensure that the pulse duration (t_p) is limited to 10 ms to avoid overheating.

5. Storage:

   • Store the device in a dry, cool place with temperatures between -55掳C and 150掳C.
   • Avoid exposure to high humidity and corrosive environments.

6. Testing and Verification:

   • Before installation, verify the device parameters using a suitable test setup.
   • Ensure that the device meets the required specifications under the intended operating conditions.

7. Safety Precautions:

   • Always follow safe electrical practices when handling and testing the device.
   • Use appropriate personal protective equipment (PPE) as necessary.

(For reference only)