Details

---

BUY HRD050R6 https://www.utsource.net/itm/p/12609955.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Rated Voltage	VRMS	-	250	-	V	-
Rated Current	IRMS	-	5	-	A	-
Maximum On-State Current	ITSM	-	50	-	A	For 10 ms, non-repetitive
Peak Off-State Voltage	VDRM	-	700	-	V	-
Gate Trigger Current	IGT	5	-	15	mA	-
Holding Current	IH	5	-	15	mA	-
Dissipation Power	PD	-	25	-	W	-
Junction Temperature	TJ	-40	-	125	掳C	-
Storage Temperature	TS	-40	-	125	掳C	-

Instructions for Use

1. Mounting and Handling:

   • Ensure that the device is mounted on a suitable heatsink to maintain junction temperature within specified limits.
   • Handle the device with care to avoid mechanical damage.

2. Electrical Connections:

   • Connect the device according to the circuit diagram provided in the application notes.
   • Ensure that the gate trigger current (I_GT) is sufficient to turn the device on reliably.
   • Do not exceed the maximum ratings for voltage and current to prevent damage to the device.

3. Thermal Management:

   • Monitor the junction temperature (T_J) to ensure it does not exceed 125掳C.
   • Use appropriate thermal interface materials to enhance heat transfer from the device to the heatsink.

4. Testing and Troubleshooting:

   • Test the device under controlled conditions to verify its performance.
   • If the device fails to operate correctly, check for proper connections, correct gate trigger current, and adequate cooling.

5. Storage:

   • Store the device in a dry, cool place away from direct sunlight and extreme temperatures.
   • Avoid exposure to corrosive environments.

6. Safety Precautions:

   • Always use appropriate safety equipment when handling high-voltage circuits.
   • Follow all relevant electrical safety standards and guidelines.

(For reference only)