Details

---

BUY 74HC2G04GW https://www.utsource.net/itm/p/12609966.html

Parameter	Description	Value
Part Number	Component Identifier	74HC2G04GW
Function	Single Inverter with Schmitt Trigger Inputs
Technology	CMOS
Supply Voltage (VCC)	Operating Supply Voltage Range	2V to 6V
Input Voltage (VIH)	Minimum Input High Voltage	VCC - 1.5V
Input Voltage (VIL)	Maximum Input Low Voltage	0.8V
Output Voltage (VOH)	Minimum Output High Voltage	VCC - 0.2V
Output Voltage (VOL)	Maximum Output Low Voltage	0.2V
Propagation Delay	Time for signal to propagate from input to output	9ns at VCC = 4.5V
Power Dissipation	Maximum Power Dissipation	100mW
Operating Temperature	Ambient Operating Temperature Range	-40掳C to +85掳C
Package Type	Package Style	SOT-363/SC-88A
Pin Count	Number of Pins	6

Instructions:

1. Power Supply: Connect the supply voltage (VCC) between 2V and 6V to pin 1, and ground (GND) to pin 4.
2. Input Connection: Apply the input signal to pin 2. Ensure the input voltage levels are within the specified VIH and VIL limits.
3. Output Connection: The inverted output is available on pin 3. Connect this pin to the next stage or load as required.
4. Handling Precautions: This device is sensitive to electrostatic discharge (ESD). Handle with care and follow ESD guidelines during installation.
5. Thermal Consideration: Ensure that the operating temperature remains within the specified range to avoid damage or performance degradation.
6. Mounting Orientation: Place the component in the correct orientation on the PCB. Refer to the package diagram provided by the manufacturer for accurate placement.

(For reference only)