Details

---

BUY G6A-274P-24VDC. https://www.utsource.net/itm/p/12609980.html

Parameter	Value	Description
Type	G6A-274P-24VDC	Relay model
Coil Voltage	24 VDC	Operating voltage of the relay coil
Coil Power	1.5 W	Power consumption of the relay coil
Coil Current	62.5 mA	Current required by the relay coil
Contact Form	SPDT	Single Pole Double Throw contact configuration
Contact Rating	10 A, 250 VAC	Maximum current and voltage for contacts
Insulation Resistance	100 M惟 min	Minimum resistance between contacts and coil
Dielectric Strength	1500 VAC (50/60 Hz) for 1 min	Voltage withstand capability
Operating Temperature	-40 to +85 掳C	Temperature range for reliable operation
Storage Temperature	-40 to +85 掳C	Temperature range for storage
Relative Humidity	5 to 95% RH	Operating humidity range
Vibration Resistance	10 to 55 Hz, 2G	Vibration tolerance level
Shock Resistance	50G	Shock tolerance level
Terminal Type	Plug-in	Method of connecting wires to the relay

Instructions:

1. Installation: Ensure that the relay is installed in a location where it will not be exposed to excessive heat, moisture, or mechanical stress.
2. Wiring: Connect the coil terminals to the appropriate power supply. For the contacts, connect the load to the common terminal and either normally open (NO) or normally closed (NC) depending on the application requirements.
3. Power Supply: Use a regulated power supply that matches the rated coil voltage of 24 VDC.
4. Load Connection: Make sure the load connected to the relay contacts does not exceed the contact rating of 10 A at 250 VAC.
5. Testing: Before full-scale operation, test the relay under load conditions to ensure proper switching action.
6. Maintenance: Regularly inspect the relay for signs of wear or damage. Clean dust and debris from the relay as necessary.
7. Environmental Considerations: Operate and store the relay within the specified temperature and humidity ranges to avoid performance issues.

(For reference only)