Details

---

BUY 502JN https://www.utsource.net/itm/p/12609985.html

Parameter	Description	Value
Part Number	Component Identifier	502JN
Type	Capacitor Type	Ceramic
Capacitance	Nominal Capacitance	50 pF
Tolerance	Capacitance Tolerance	卤5% (J)
Voltage Rating	Maximum DC Working Voltage	50 V
Temperature Coefficient	Temperature Coefficient	NPO (0 ppm/掳C)
Operating Temperature Range	Operating Temp Range	-55掳C to +125掳C
Case Size	Physical Size	0805 (2012 Metric)
Termination	Lead/Termination Style	SMD (Surface Mount)
Compliance	Regulatory Compliance	RoHS Compliant

Instructions for Use:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Use appropriate ESD (Electrostatic Discharge) protection when handling.

2. Mounting:

   • Ensure the soldering iron or reflow oven is set to the recommended temperature.
   • Use a non-corrosive, no-clean flux for optimal soldering results.
   • Avoid excessive heat and prolonged heating during soldering to prevent damage.

3. Soldering:

   • Preheat the PCB to 100-120掳C before soldering.
   • Soldering time should not exceed 3 seconds per joint.
   • Allow the capacitor to cool naturally after soldering.

4. Inspection:

   • Visually inspect the solder joints for proper wetting and absence of shorts.
   • Use an ohmmeter to check for continuity and ensure there are no short circuits.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Use within the recommended shelf life to ensure optimal performance.

6. Testing:

   • Test the assembled board using a capacitance meter to verify the correct value and tolerance.
   • Perform functional testing as per the application requirements.

7. Application:

   • Suitable for use in RF circuits, decoupling, and filtering applications.
   • Ensure the operating voltage does not exceed the rated voltage to avoid failure.

(For reference only)