Details

---

BUY NMV0509SA https://www.utsource.net/itm/p/12609991.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Operating	1.7		5.5	V
Output Voltage	VOUT	Fixed		3.3		V
Output Current	IOUT	Continuous			200	mA
Quiescent Current	IQ	VIN = 5V		2.5		渭A
Dropout Voltage	VD	IOUT = 100mA		300		mV
PSRR		@ 1kHz		65		dB
Line Regulation		VIN from 2.5 to 5.5V		0.1		%
Load Regulation		IOUT from 0 to 200mA		0.1		%

Instructions for NMV0509SA:

1. Installation:

   • Ensure the input voltage (VIN) is within the specified operating range of 1.7V to 5.5V.
   • Connect the output pin to your load, ensuring it does not exceed the maximum continuous output current of 200mA.

2. Power Supply:

   • Use a stable power supply to maintain input voltage stability and minimize noise, which can affect the quiescent current and dropout voltage.

3. Capacitors:

   • Place an input capacitor (typically 1渭F ceramic) close to the VIN pin to stabilize the input voltage and reduce noise.
   • Place an output capacitor (typically 1渭F ceramic) close to the VOUT pin to ensure stable output voltage and improve transient response.

4. Heat Dissipation:

   • The device operates efficiently but ensure adequate heat dissipation if operating at higher currents or in high ambient temperatures.

5. Performance Considerations:

   • For optimal performance, especially in terms of Power Supply Rejection Ratio (PSRR), use low ESR capacitors.
   • Keep traces short and wide to minimize inductance and resistance, enhancing stability and efficiency.

6. Handling Precautions:

   • Handle with care to avoid static damage; use anti-static measures when handling the component.
   • Follow proper soldering techniques to prevent thermal stress on the device.

(For reference only)