Details

---

BUY FRS1B-S5 https://www.utsource.net/itm/p/12610001.html

Parameter	Description	Value
Part Number	Full part number	FRS1B-S5
Type	Device type	Solid State Relay
Input Voltage (VI)	Operating input voltage range	3 to 32 VDC
Input Current (II)	Maximum input current	10 mA at 5 VDC
Output Voltage (VO)	Output voltage rating	24 to 280 VAC
Output Current (IO)	Continuous output current	5 A
Isolation Voltage	Isolation between input and output	5000 VAC
Switching Time (tON/tOFF)	Turn-on/turn-off time	1 ms / 0.5 ms
Leakage Current (ILK)	Maximum leakage current	10 渭A
Operating Temperature (TOP)	Operating temperature range	-40掳C to +85掳C
Storage Temperature (TSTG)	Storage temperature range	-55掳C to +125掳C
Mounting Type	Method of mounting	Surface Mount (SMD)
Package Type	Package style	SO-8
Dimensions	Physical size	9.7 mm x 9.7 mm x 1.4 mm

Instructions for Use:

1. Power Supply:

   • Ensure the input voltage is within the specified range (3 to 32 VDC).
   • The input current should not exceed 10 mA at 5 VDC.

2. Load Connection:

   • Connect the load to the output terminals, ensuring the load voltage is within the specified range (24 to 280 VAC).
   • The continuous output current should not exceed 5 A.

3. Isolation:

   • The relay provides 5000 VAC isolation between the input and output circuits. Ensure proper insulation and spacing to maintain this isolation.

4. Switching:

   • The relay has a turn-on time of 1 ms and a turn-off time of 0.5 ms. Design your control circuit to accommodate these switching times.

5. Leakage Current:

   • The maximum leakage current is 10 渭A. This should be considered when designing sensitive circuits.

6. Temperature Considerations:

   • Operate the relay within the temperature range of -40掳C to +85掳C.
   • Store the relay in an environment with temperatures ranging from -55掳C to +125掳C.

7. Mounting:

   • Solder the relay onto the PCB using standard SMD soldering techniques.
   • Ensure the board is flat and stable during soldering to avoid mechanical stress on the component.

8. Handling:

   • Handle the relay with care to avoid damage to the leads and package.
   • Use appropriate ESD protection measures to prevent damage from static electricity.

9. Testing:

   • Test the relay after installation to ensure it operates correctly under the expected conditions.
   • Verify that the input voltage and current are within the specified limits and that the output can handle the load without exceeding the maximum ratings.

(For reference only)