Details

---

BUY 74ALS00AN https://www.utsource.net/itm/p/12610003.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Supply Voltage	VCC	2.0	-	5.5	V	-
Input Low Voltage	VIL	-	-	0.8	V	VCC = 5V
Input High Voltage	VIH	2.0	-	-	V	VCC = 5V
Output Low Voltage	VOL	-	0.25	0.4	V	IOL = 16mA, VCC = 5V
Output High Voltage	VOH	2.7	-	-	V	IOH = -0.4mA, VCC = 5V
Input Leakage Current	IIL	-	-1	1	渭A	VCC = 5V
Output Leakage Current	IOL	-	-50	50	渭A	VCC = 5V, VO = 0V or VCC
Propagation Delay Time (Typical)	tpd	-	6	-	ns	VCC = 5V, TA = 25掳C, VI = VCC/2, VO = 1.5V or 3.5V
Power Dissipation	PD	-	-	100	mW	Per Package

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.0V to 5.5V.
   • Connect V_CC to the positive power supply and GND to ground.

2. Input Signals:

   • For logic low, input voltages should be below 0.8V.
   • For logic high, input voltages should be above 2.0V.
   • Ensure input signals do not exceed V_CC or go below GND to avoid damage.

3. Output Signals:

   • When the output is low, the voltage will be around 0.25V to 0.4V.
   • When the output is high, the voltage will be at least 2.7V.
   • The output can sink up to 16mA and source up to 0.4mA.

4. Propagation Delay:

   • The typical propagation delay time (t_pd) is 6ns under standard conditions.
   • This value can vary with temperature and supply voltage.

5. Power Dissipation:

   • The maximum power dissipation per package is 100mW.
   • Ensure adequate heat dissipation if operating near this limit.

6. Handling:

   • Handle the IC with care to avoid static discharge.
   • Use proper anti-static precautions when handling and storing the device.

7. Storage:

   • Store in a dry, cool place to prevent moisture damage.
   • Follow recommended storage guidelines provided by the manufacturer.

(For reference only)