Details

---

BUY XB7608AJ https://www.utsource.net/itm/p/12610010.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	4.5	-	42	V	Operating input voltage range
Output Voltage	VOUT	-	8	-	V	Fixed output voltage
Output Current	IOUT	-	-	3	A	Maximum continuous output current
Efficiency	畏	-	92	-	%	Typical efficiency at nominal conditions
Switching Frequency	fSW	-	500	-	kHz	Nominal switching frequency
Quiescent Current	IQ	-	10	-	渭A	Quiescent current at no load
Dropout Voltage	VDROPOUT	-	1.2	-	V	Dropout voltage at full load
Load Regulation	-	-	0.5	-	%	Load regulation over 0% to 100% load
Line Regulation	-	-	0.2	-	%	Line regulation over input voltage range
Ripple Rejection	-	-	70	-	dB	Power supply rejection ratio (PSRR) at 100 Hz
Operating Temperature	TOPR	-40	-	125	掳C	Operating temperature range
Storage Temperature	TSTG	-65	-	150	掳C	Storage temperature range
Package Type	-	-	-	-	SOIC-8	Package type

Instructions for Using XB7608AJ

1. Input Voltage:

   • Ensure the input voltage is within the specified range (4.5V to 42V) to avoid damage to the device.

2. Output Voltage:

   • The output voltage is fixed at 8V. No external components are required to set this voltage.

3. Output Current:

   • The maximum continuous output current is 3A. Ensure the load does not exceed this limit to prevent overheating or damage.

4. Efficiency:

   • The typical efficiency is 92%. This value can vary based on the input voltage and load conditions.

5. Switching Frequency:

   • The nominal switching frequency is 500kHz. This helps in minimizing the size of external components like inductors and capacitors.

6. Quiescent Current:

   • The quiescent current is 10渭A, which is very low, making the device suitable for battery-powered applications.

7. Dropout Voltage:

   • The dropout voltage is 1.2V at full load. This means the input voltage should be at least 9.2V to maintain the 8V output under full load conditions.

8. Load and Line Regulation:

   • The load regulation is 0.5%, and the line regulation is 0.2%. These values indicate the stability of the output voltage under varying load and input conditions.

9. Ripple Rejection:

   • The power supply rejection ratio (PSRR) is 70dB at 100Hz, which helps in filtering out input voltage ripple.

10. Operating and Storage Temperature:

    • The operating temperature range is -40掳C to 125掳C, and the storage temperature range is -65掳C to 150掳C. Ensure the device operates within these limits to avoid performance degradation or failure.

11. Package Type:

    • The device comes in an SOIC-8 package, which is surface-mountable and suitable for automated assembly processes.

12. PCB Layout:

    • Use a proper PCB layout with short traces and adequate ground planes to minimize noise and improve thermal performance.

13. Thermal Management:

    • If operating near the maximum output current, ensure adequate heat dissipation through a heatsink or thermal pad to maintain the junction temperature within safe limits.

14. Capacitor Selection:

    • Use high-quality ceramic capacitors for input and output filtering to ensure stable operation and minimize ripple.

15. Inductor Selection:

    • Choose an inductor with low DC resistance and appropriate saturation current to handle the maximum output current efficiently.

By following these guidelines, you can ensure optimal performance and reliability of the XB7608AJ in your application.

(For reference only)