Details

---

BUY FAN9611 SOIC 16 https://www.utsource.net/itm/p/12610012.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	4.5	-	16	V	Operating supply voltage range
Input High-Level Voltage	VIH	2	-	VCC+0.3	V	Digital input high-level voltage
Input Low-Level Voltage	VIL	0	-	0.8	V	Digital input low-level voltage
Output Current Limit	IOL	-	1.5	2.5	A	Output current limit
Shutdown Current	ISD	0	0.5	1	渭A	Current consumption in shutdown mode
Operating Temperature	TOPR	-40	-	125	掳C	Operating temperature range
Storage Temperature	TSTG	-55	-	150	掳C	Storage temperature range

Instructions for FAN9611 SOIC-16

1. Power Supply Connection:

   • Connect the VCC pin to a stable power supply within the specified voltage range (4.5V to 16V).
   • Ensure the GND pin is connected to the system ground.

2. Input Signal Handling:

   • Apply digital control signals to the appropriate input pins ensuring they meet the VIH and VIL specifications.
   • Avoid exceeding the maximum input voltage levels to prevent damage.

3. Output Configuration:

   • The output stage can deliver up to 2.5A of current, but it is advisable to stay within the typical current limit of 1.5A for reliable operation.
   • Ensure proper heat sinking if operating at higher currents or temperatures.

4. Thermal Management:

   • Monitor the operating temperature to ensure it stays within the -40掳C to 125掳C range.
   • Implement adequate cooling solutions such as heatsinks or forced air cooling if necessary.

5. Shutdown Mode:

   • To enter shutdown mode, set the enable pin to a logic low level.
   • During shutdown, the device consumes minimal current (up to 1渭A).

6. Storage Conditions:

   • When not in use, store the device in an environment with temperatures between -55掳C and 150掳C.

7. Handling Precautions:

   • Handle the IC with care to avoid electrostatic discharge (ESD) damage.
   • Follow proper soldering techniques to ensure reliable connections without overheating the package.

(For reference only)