Details

---

BUY LED 0805 GREEN https://www.utsource.net/itm/p/12610017.html

Parameter	Value	Unit
Package Type	0805	-
Color	Green	-
Wavelength	565 to 577	nm
Forward Voltage (Vf)	2.0 to 2.4	V
Reverse Voltage (Vr)	5	V
Forward Current (If)	20	mA
Peak Forward Current	100	mA
Viewing Angle	120	掳
Operating Temperature	-40 to +85	掳C
Storage Temperature	-40 to +100	掳C
Luminous Intensity	1000 to 2000	mcd
Soldering Temperature	260 (max 10 seconds)	掳C

Instructions for Use:

1. Mounting:

   • Ensure that the PCB layout is designed to accommodate the 0805 package.
   • Place the LED on the PCB with the correct polarity (anode and cathode).

2. Soldering:

   • Preheat the PCB to a temperature of around 120掳C to 150掳C.
   • Apply solder paste or flux to the pads.
   • Solder the LED using a soldering iron or reflow oven at a maximum temperature of 260掳C for no more than 10 seconds.

3. Electrical Connections:

   • Connect the anode (longer lead or marked side) to the positive terminal of the power supply.
   • Connect the cathode (shorter lead or unmarked side) to the negative terminal of the power supply or ground.
   • Use a current-limiting resistor to ensure the forward current does not exceed 20 mA.

4. Handling:

   • Handle the LED with care to avoid physical damage.
   • Avoid exposing the LED to excessive moisture or static electricity.

5. Storage:

   • Store the LEDs in a dry, cool place away from direct sunlight.
   • Keep the LEDs in their original packaging until ready for use to protect them from environmental factors.

6. Testing:

   • Test the LED by applying the recommended forward voltage and current.
   • Verify the correct operation by observing the light output and ensuring it matches the specified luminous intensity.

(For reference only)