Details

---

BUY HN2416S https://www.utsource.net/itm/p/12610024.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	4.5	-	5.5	V
Operating Current	Icc	-	10	-	渭A
Input High Level	VIH	3.0	-	5.5	V
Input Low Level	VIL	0	-	0.8	V
Output High Level	VOH	3.0	-	5.5	V
Output Low Level	VOL	0	-	0.4	V
Propagation Delay Time	tpd	-	100	-	ns
Storage Temperature	Tstg	-40	-	85	掳C
Operating Temperature	Topr	-40	-	85	掳C

Instructions for Using HN2416S

1. Supply Voltage:

   • Ensure the supply voltage (Vcc) is within the range of 4.5V to 5.5V. Operating outside this range can damage the device.

2. Operating Current:

   • The typical operating current (Icc) is 10 渭A. Monitor the current to ensure it does not exceed this value to prevent overheating.

3. Input Levels:

   • For a valid high input (VIH), the voltage should be between 3.0V and 5.5V.
   • For a valid low input (VIL), the voltage should be between 0V and 0.8V.

4. Output Levels:

   • The output high level (VOH) will be between 3.0V and 5.5V.
   • The output low level (VOL) will be between 0V and 0.4V.

5. Propagation Delay Time:

   • The typical propagation delay time (tpd) is 100 ns. This is the time it takes for the output to change after the input changes.

6. Temperature Range:

   • The storage temperature (Tstg) range is from -40掳C to 85掳C.
   • The operating temperature (Topr) range is from -40掳C to 85掳C. Ensure the device operates within these limits to avoid performance degradation or failure.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Use appropriate ESD protection measures when handling the device.

8. Mounting:

   • Ensure proper soldering techniques are used to avoid thermal stress on the device.
   • Follow the recommended PCB layout guidelines to ensure optimal performance and reliability.

9. Testing:

   • Before deploying the device in a final application, perform thorough testing to ensure it meets all specified parameters and operates correctly under expected conditions.

(For reference only)