Details

---

BUY INA228AQDGSRQ1 https://www.utsource.net/itm/p/12610039.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Supply Voltage	VDD	2.7	-	5.5	V
Operating Temperature	Toper	-40	-	125	掳C
Storage Temperature	Tstg	-65	-	150	掳C
Input Voltage Range	VIN	-0.3	-	VDD+0.3	V
Quiescent Current	IQ	-	120	-	渭A	@ VDD=5V
Differential Input Voltage	VINdiff	-	-	卤80	mV
Common Mode Input Voltage	VINcm	-0.3	-	VDD+0.3	V
Output Voltage Swing	Vout	-0.1	-	VDD-0.1	V
Bandwidth	BW	-	200	-	kHz	Small Signal
Conversion Time	tconv	-	1.1	-	ms	Single Shot

Instructions for INA228AQDGSRQ1

1. Power Supply Connection:

   • Connect the supply voltage (VDD) between 2.7V and 5.5V to the VDD pin.
   • Ensure a stable power supply to avoid measurement inaccuracies.

2. Input Configuration:

   • The input voltage range should be within -0.3V to VDD + 0.3V.
   • For differential measurements, ensure the differential input voltage does not exceed 卤80mV.

3. Output Considerations:

   • The output voltage swing is from -0.1V to VDD - 0.1V. Design your system to accommodate this range.

4. Operating Environment:

   • Operate the device within the temperature range of -40掳C to 125掳C to ensure reliable performance.
   • Store the device in an environment between -65掳C and 150掳C.

5. Performance Optimization:

   • For optimal performance, operate within the specified bandwidth of up to 200kHz.
   • Adjust conversion time as needed, noting that single-shot conversion takes approximately 1.1ms.

6. Handling Precautions:

   • Handle with care to avoid electrostatic discharge (ESD), which can damage sensitive components.
   • Follow manufacturer guidelines for soldering and mounting to ensure proper installation.

Note: Always refer to the datasheet provided by the manufacturer for the most accurate and detailed specifications and instructions.

(For reference only)