Details

---

BUY DFKH2-14 0.6-11/A https://www.utsource.net/itm/p/12610061.html

Parameter	Value
Part Number	DFKH2-14 0.6-11/A
Type	Relay
Coil Voltage	0.6 to 11V DC
Contact Form	SPDT (Single Pole Double Throw)
Contact Rating	5A at 250V AC / 30V DC
**Coil Power Consumption	0.3W (nominal)
Insulation Resistance	100M惟 (min) at 500V DC
Dielectric Strength	1000V AC for 1 minute
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Humidity	95% RH (non-condensing)
Dimensions	14mm x 14mm x 14mm
Weight	5g

Instructions:

1. Installation:

   • Ensure the relay is mounted on a flat, stable surface.
   • Use appropriate fasteners to secure the relay in place.

2. Wiring:

   • Connect the coil terminals to the control circuit using the specified voltage range.
   • Connect the load to the common (C) and normally open (NO) or normally closed (NC) contacts as required.

3. Operation:

   • Apply the rated coil voltage to energize the relay.
   • The normally open contact will close, and the normally closed contact will open when the relay is energized.
   • When the coil voltage is removed, the relay returns to its default state.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay with a dry, soft cloth to remove dust and debris.

5. Precautions:

   • Do not exceed the maximum voltage or current ratings.
   • Avoid exposing the relay to extreme temperatures or humid environments.
   • Ensure proper grounding to prevent electrical hazards.

6. Storage:

   • Store the relay in a dry, cool place away from direct sunlight and corrosive materials.

(For reference only)