Details

---

BUY M1661S https://www.utsource.net/itm/p/12610064.html

Parameter	Description	Value
Part Number	Component Identifier	M1661S
Type	Component Type	Diode
Technology	Manufacturing Technology	Schottky Barrier
Package	Physical Package	SOD-323 (SC-79)
Forward Voltage (Vf)	Maximum Forward Voltage at Rated Current	0.45 V (at 1 A)
Reverse Voltage (Vr)	Maximum Reverse Voltage	60 V
Forward Current (If)	Maximum Forward Current	1 A
Peak Reverse Current (Irrm)	Maximum Peak Reverse Current	100 渭A (at 25掳C)
Power Dissipation (Pd)	Maximum Power Dissipation	350 mW
Operating Temperature (Tj)	Junction Temperature Range	-65掳C to +150掳C
Storage Temperature (Ts)	Storage Temperature Range	-65掳C to +150掳C
Thermal Resistance (Rth)	Junction to Ambient Thermal Resistance	200 掳C/W
Capacitance (Cj0)	Zero Bias Junction Capacitance	15 pF (at 1 MHz)
Reverse Recovery Time (trr)	Reverse Recovery Time	10 ns

Instructions for Use:

1. Mounting:

   • Ensure that the diode is mounted on a suitable PCB with proper thermal management.
   • Use appropriate soldering techniques to avoid overheating the diode during assembly.

2. Electrical Connections:

   • Connect the anode (A) to the positive side of the circuit.
   • Connect the cathode (K) to the negative side of the circuit.
   • Ensure that the maximum forward current and reverse voltage ratings are not exceeded.

3. Thermal Management:

   • Provide adequate cooling if the diode will be operating near its maximum power dissipation.
   • Ensure that the junction temperature does not exceed 150掳C.

4. Handling:

   • Handle the diode with care to avoid mechanical damage.
   • Use ESD (Electrostatic Discharge) protection when handling to prevent damage from static electricity.

5. Testing:

   • Test the diode using a multimeter or diode tester to ensure it is functioning correctly before installation.
   • Verify the forward and reverse characteristics to ensure they meet the specified parameters.

6. Storage:

   • Store the diode in a dry, cool place away from direct sunlight.
   • Keep the diode in its original packaging until ready for use to protect against moisture and static damage.

(For reference only)