Details

---

BUY LT8331IMSE#TRPBF https://www.utsource.net/itm/p/12610080.html

Parameter	Description	Min	Typ	Max	Unit
Input Voltage Range	Operating input voltage range	4.5		60	V
Output Voltage Range	Adjustable output voltage range	0.8		24	V
Switching Frequency	Internal oscillator frequency		1	5	MHz
Quiescent Current	Supply current with no load		95		渭A
Efficiency	Peak efficiency		97		%
Shutdown Current	Supply current in shutdown mode		1		渭A
Maximum Output Current	Maximum continuous output current			3	A
Operating Temperature Range	Junction temperature range	-40		125	掳C

Instructions for Using LT8331IMSE#TRPBF

1. Power Supply Connection:

   • Connect the input voltage to the VIN pin within the specified range (4.5V to 60V).
   • Ensure a stable and clean power supply to avoid any transient issues.

2. Output Configuration:

   • Configure the output voltage by setting the feedback resistor divider network. The output voltage can be set between 0.8V and 24V.
   • Use an external inductor suitable for the desired output current and switching frequency.

3. Frequency Setting:

   • The switching frequency is internally set to 1MHz, but it can be adjusted up to 5MHz using an external resistor on the RT pin if needed.

4. Thermal Considerations:

   • Place the device on a PCB with adequate copper area to help dissipate heat, especially when operating at higher temperatures or currents.
   • Ensure that the ambient temperature does not exceed the maximum operating temperature of 125掳C.

5. Shutdown Mode:

   • To put the device into shutdown mode, pull the SHDN pin low. This reduces the supply current to approximately 1渭A.

6. Protection Features:

   • The device includes overcurrent protection and thermal shutdown features to safeguard against excessive load conditions and overheating.

7. Layout Recommendations:

   • Keep the input capacitor close to the VIN and GND pins to minimize noise and improve stability.
   • Route high-frequency switching nodes carefully to reduce EMI emissions.

For detailed design considerations and specific application circuits, refer to the datasheet provided by the manufacturer.

(For reference only)