Details

---

BUY BTS432E2. https://www.utsource.net/itm/p/12610084.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Continuous Drain Current	ID	-	16	-	A	Tc = 25掳C, VGS = 10V
Pulse Drain Current	Ipd	-	48	-	A	tp = 10ms, Tc = 25掳C, VGS = 10V
Gate-Source Voltage	VGS	-18	-	18	V	-
Drain-Source Voltage	VDS	-	-	45	V	-
On-State Resistance	RDS(on)	-	2.2	-	m惟	VGS = 10V, ID = 16A
Gate Charge	QG	-	97	-	nC	VGS = 10V, VDS = 12V, ID = 16A
Input Capacitance	Ciss	-	3200	-	pF	VDS = 12V, f = 1MHz
Output Capacitance	Coss	-	1200	-	pF	VDS = 12V, f = 1MHz
Reverse Transfer Capacitance	Crss	-	2000	-	pF	VDS = 12V, f = 1MHz
Thermal Resistance Junction to Case	R胃JC	-	0.6	-	掳C/W	-
Maximum Junction Temperature	TJ(max)	-	-	150	掳C	-

Instructions for Use:

1. Power Supply and Grounding:

   • Ensure that the power supply voltage (VDS) does not exceed the maximum rated value of 45V.
   • Properly ground the source terminal to avoid floating potentials.

2. Gate Drive:

   • Apply a gate-source voltage (VGS) between -18V and 18V.
   • For optimal performance, use a VGS of 10V to fully turn on the MOSFET and minimize on-state resistance.

3. Current Handling:

   • The continuous drain current (ID) should not exceed 16A at 25掳C case temperature.
   • For pulse applications, the peak current can be up to 48A for a duration of 10ms.

4. Thermal Management:

   • Monitor the junction temperature (TJ) to ensure it does not exceed 150掳C.
   • Use appropriate heat sinks or cooling solutions to manage thermal dissipation.

5. Capacitance Considerations:

   • Account for the input capacitance (Ciss), output capacitance (Coss), and reverse transfer capacitance (Crss) when designing the circuit to minimize switching losses and improve efficiency.

6. Storage and Handling:

   • Store the device in a dry environment to prevent moisture damage.
   • Handle with care to avoid static discharge, which can damage the MOSFET.

7. Testing:

   • Before integrating the BTS432E2 into your design, perform initial testing under controlled conditions to verify its performance and reliability.

8. Compliance:

   • Ensure that the device is used in compliance with all relevant safety and regulatory standards.

(For reference only)