Details

---

BUY IXTP120P065T https://www.utsource.net/itm/p/12610100.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Continuous	4.5		65	V
Output Current	IOUT	Continuous		120		A
Peak Output Current	IOUT(P)	Pulse		180		A
Junction Temperature	Tj	Operating Range	-40		150	掳C
Storage Temperature	Tstg		-55		150	掳C
Thermal Resistance	RthJC	Junction to Case		0.3		掳C/W
Switching Frequency	fSW	Typical		100		kHz

Instructions for IXTP120P065T

1. Installation and Handling:

   • Handle the device with care to avoid damage to the pins or body.
   • Ensure proper mounting on a heatsink if operating near maximum current or temperature limits.

2. Power Supply Considerations:

   • The input voltage must be within the specified range (4.5V to 65V).
   • Use appropriate decoupling capacitors close to the power supply pins to ensure stability.

3. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed 150掳C.
   • Utilize thermal vias and adequate PCB copper area to dissipate heat effectively.

4. Current Limiting:

   • Design the circuit to limit the output current to within the continuous rating of 120A, considering derating factors at higher temperatures.
   • Account for peak currents up to 180A for short pulses.

5. Switching Frequency:

   • Operate at a switching frequency of typically 100kHz, ensuring all components are rated for this frequency.

6. Environmental Conditions:

   • Store the device in an environment where the temperature does not drop below -55掳C or rise above 150掳C.
   • Avoid exposing the device to excessive humidity or corrosive environments.

7. Testing and Verification:

   • After assembly, verify that the device operates within its specified parameters under all expected conditions.
   • Conduct thermal imaging and electrical tests to confirm safe operation.

(For reference only)