Details

---

BUY PICASO-A https://www.utsource.net/itm/p/12610105.html

Parameter	Description
Model	PICASO-A
Operating Voltage	3.3V to 5V
Interface	I2C, SPI
Resolution	128x64 pixels
Color Depth	Monochrome
Storage	64 KB Flash Memory
Communication	UART, I2C, SPI
Power Consumption	20mA (active), 1mA (standby)
Temperature Range	-20掳C to +70掳C
Dimensions	50mm x 30mm x 10mm

Instructions for Use

1. Powering the Module:

   • Connect the power supply to the VCC and GND pins ensuring the voltage is within the operating range of 3.3V to 5V.

2. Connecting Interfaces:

   • Choose one of the available interfaces (UART, I2C, or SPI) and connect the corresponding pins as per your application requirements.

3. Initialization:

   • Send an initialization command sequence to set up the display parameters such as contrast, bias settings, etc., using the selected communication protocol.

4. Display Control:

   • Use commands to control the display operations like clearing the screen, setting the cursor position, drawing pixels, lines, or text.

5. Data Transmission:

   • Transmit data to the PICASO-A module following the protocol specifications for either UART, I2C, or SPI communication.

6. Power Management:

   • To enter standby mode, send a specific command that reduces power consumption to 1mA. Return to active mode by sending a wake-up command.

7. Temperature Considerations:

   • Ensure the operating environment stays within the temperature range of -20掳C to +70掳C to avoid damage or malfunction.

8. Storage and Handling:

   • When not in use, store the module in a dry, cool place away from direct sunlight and sources of heat.

(For reference only)