Details

---

BUY LFXP2-8E-5TN144C https://www.utsource.net/itm/p/12610115.html

Parameter	Description
Part Number	LFXP2-8E-5TN144C
Package Type	TSSOP (Thin Shrink Small Outline Package)
Pin Count	144
Operating Temperature	-40°C to +85°C
Supply Voltage (VCC)	1.62V to 3.6V
Clock Frequency	Up to 200 MHz
I/O Standard	LVCMOS
Configuration Memory	Non-volatile flash memory
Configuration Interface	SPI, JTAG
Logic Cells	2,880
RAM Blocks	120 Kbits
DSP Blocks	24
PLLs	4
I/O Banks	12
Special Features	Embedded microcontroller, high-performance I/O, analog-to-digital converter

Instructions for Use:

1. Power Supply Connections: Ensure that the VCC and GND pins are properly connected to a stable power supply within the specified voltage range.
2. Configuration: Use either the SPI or JTAG interface to configure the device with your desired settings. Refer to the datasheet for detailed pin assignments and configuration commands.
3. Clock Setup: Connect an external clock source or oscillator to the designated clock input pin to achieve the required operating frequency.
4. Signal Integrity: For optimal performance, follow PCB layout guidelines provided in the datasheet, especially regarding decoupling capacitors and signal routing.
5. Thermal Considerations: Ensure adequate heat dissipation if operating at higher frequencies or under heavy load conditions.
6. Testing: After configuration, test all functionalities including I/O operations, PLL settings, and any embedded peripheral interfaces.

For more detailed information, refer to the manufacturer’s datasheet and application notes.

(For reference only)