Details

---

BUY AD7376ARUZ10-R7 https://www.utsource.net/itm/p/12610123.html

Parameter	Description	Value
Product Name	Analog-to-Digital Converter (ADC)	AD7376ARUZ10-R7
Package Type	Package type	24-lead SSOP
Supply Voltage	Operating supply voltage	5V
Interface	Communication interface	SPI
Resolution	ADC resolution	16-bit
Sampling Rate	Maximum sampling rate	1 MSPS
Input Type	Type of input	Differential
Reference Voltage	Internal reference voltage	4.096V
Power Consumption	Typical power consumption	15 mW
Operating Temperature	Operating temperature range	-40掳C to +85掳C
Input Range	Input voltage range	卤2.048V
SNR	Signal-to-noise ratio	91 dB (typical)
THD	Total harmonic distortion	-105 dB (typical)

Instructions:

1. Power Supply: Ensure the supply voltage is set to 5V for optimal operation.
2. Interface Setup: Configure the SPI interface as per the datasheet specifications. Ensure correct settings for clock polarity and phase.
3. Reference Voltage: The internal reference voltage is fixed at 4.096V. If an external reference is used, ensure it does not exceed the specified limits.
4. Input Configuration: Connect differential inputs within the range of 卤2.048V. Avoid exceeding this range to prevent damage.
5. Temperature Considerations: Operate within the temperature range of -40掳C to +85掳C. Outside this range, performance may degrade.
6. Sampling Rate: Set the sampling rate up to 1 MSPS based on application requirements. Higher rates may require additional power considerations.
7. Power Management: To minimize power consumption, disable unused channels or reduce the sampling rate when possible.

For detailed setup and configuration, refer to the full datasheet available from the manufacturer.

(For reference only)