Details

---

BUY VND5N07 https://www.utsource.net/itm/p/12610159.html

Parameter	Symbol	Min	Typical	Max	Unit	Condition
Drain-Source Voltage	VDS	-	70	-	V	Continuous
Gate-Source Voltage	VGS	-10	-	20	V	Continuous
Continuous Drain Current	ID	-	5	-	A	@ TA = 25掳C
Pulse Drain Current	ID(p)	-	20	-	A	@ TC = 25掳C, t = 10ms, Duty Cycle = 1%
Total Power Dissipation	PTOT	-	-	65	W	@ TC = 25掳C
Junction Temperature	TJ	-	-	175	掳C	-
Storage Temperature	TSTG	-55	-	150	掳C	-
Thermal Resistance	R胃JC	-	1.4	-	掳C/W	Junction to Case

Instructions for Use:

1. Mounting and Handling:

   • Handle the VND5N07 with care to avoid mechanical stress.
   • Ensure proper heat sinking to maintain junction temperature within safe limits.

2. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Use appropriate gate resistors to control switching speed and reduce electromagnetic interference (EMI).

3. Operating Conditions:

   • Do not exceed the maximum ratings for drain-source voltage, gate-source voltage, and continuous or pulse drain current.
   • Ensure the junction temperature does not exceed 175掳C to prevent thermal damage.

4. Storage:

   • Store the device in a dry, cool environment within the specified storage temperature range (-55掳C to 150掳C).

5. Testing:

   • Perform initial testing at room temperature to verify functionality.
   • Gradually increase load and environmental conditions to ensure stable operation.

6. Safety:

   • Use appropriate protective equipment when handling high-voltage circuits.
   • Follow all relevant safety guidelines and regulations.

7. Troubleshooting:

   • If the device fails to operate correctly, check connections, power supply, and load conditions.
   • Refer to the datasheet for detailed troubleshooting tips and contact the manufacturer for further assistance if needed.

(For reference only)