Details

---

BUY SMK830 https://www.utsource.net/itm/p/12610163.html

Parameter	Description	Value
Part Number	Component Identifier	SMK830
Type	Component Type	Surface Mount Resistor
Resistance	Resistance Value	1000 惟 (1 k惟)
Tolerance	Tolerance of Resistance	卤1%
Power Rating	Maximum Power Dissipation	0.125 W (1/8 W)
Operating Temperature	Temperature Range for Operation	-55掳C to +125掳C
Operating Voltage	Maximum Operating Voltage	200 V
Case Size	Physical Dimensions	0805 (2.0 x 1.25 mm)
Termination	Connection Type	Solder Pads
Compliance	Regulatory Standards	RoHS Compliant
Packaging	Shipping Format	Tape and Reel

Instructions for Use:

1. Handling:

   • Handle the SMK830 with care to avoid damage.
   • Use ESD (Electrostatic Discharge) precautions to prevent static damage.

2. Mounting:

   • Place the resistor on the PCB (Printed Circuit Board) according to the design layout.
   • Ensure the solder pads are clean and free of contaminants.
   • Apply a small amount of solder paste to the pads if using a reflow process.

3. Soldering:

   • Use a reflow soldering process or a manual soldering iron set to a temperature between 260掳C and 300掳C.
   • Ensure the solder joints are smooth and free of voids or cold solder.
   • Avoid overheating the component, as it can lead to damage.

4. Inspection:

   • Visually inspect the solder joints for proper wetting and alignment.
   • Use a multimeter to verify the resistance value and ensure it is within the specified tolerance.

5. Storage:

   • Store the SMK830 in a dry, cool place to prevent moisture damage.
   • Keep the components in their original packaging until ready for use.

6. Disposal:

   • Dispose of the SMK830 according to local environmental regulations.
   • Recycle where possible to minimize waste.

(For reference only)