Details

---

BUY TPS65160APWP https://www.utsource.net/itm/p/12610166.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	2.9	-	5.5	V	Supply voltage range
Output Voltage	VOUT1	-	3.3	-	V	Regulated output voltage for VOUT1
	VOUT2	-	1.8	-	V	Regulated output voltage for VOUT2
Load Current	ILOAD	-	-	600	mA	Maximum load current per channel
Quiescent Current	IQ	-	60	-	渭A	Quiescent current
Shutdown Current	ISD	-	0.2	-	渭A	Shutdown current
Efficiency	畏	-	90	-	%	Typical efficiency at full load
Operating Temperature	TOPR	-40	-	85	掳C	Operating ambient temperature range
Storage Temperature	TSTG	-65	-	150	掳C	Storage temperature range

Instructions for Using TPS65160APWP

1. Power Supply Connection:

   • Connect the input power supply to the VIN pin, ensuring the voltage is within the specified range (2.9V to 5.5V).

2. Output Configuration:

   • Set the output voltages VOUT1 and VOUT2 according to your application requirements using external resistors or fixed voltage options as provided by the device.

3. Load Connections:

   • Connect the load to the VOUT1 and VOUT2 pins, ensuring that the maximum load current does not exceed 600mA per channel.

4. Enable/Shutdown Control:

   • Use the EN pin to enable or disable the device. A logic high on the EN pin enables the regulator, while a logic low puts it into shutdown mode, reducing the current draw to approximately 0.2渭A.

5. Thermal Considerations:

   • Ensure proper thermal management by providing adequate PCB copper area around the device and maintaining an operating temperature within the specified range (-40掳C to +85掳C).

6. Capacitor Selection:

   • Choose input and output capacitors with appropriate values and ratings to stabilize the regulator and minimize ripple. Refer to the datasheet for specific recommendations.

7. Layout Recommendations:

   • Follow good PCB layout practices to minimize noise and parasitic effects. Place bypass capacitors close to the power and ground pins of the IC.

8. Protection Features:

   • The device includes internal protection features such as overcurrent and thermal shutdown. No additional components are typically required for these protections.

For detailed specifications and more advanced configurations, refer to the official datasheet provided by the manufacturer.

(For reference only)