Details

---

BUY G2RL-1-E-5VDC https://www.utsource.net/itm/p/12610168.html

Parameter	Description	Value
Part Number	Product Code	G2RL-1-E-5VDC
Type	Relay Type	SPDT
Coil Voltage	Operating Voltage for Coil	5V DC
Coil Power	Power Consumption of Coil	0.375W
Coil Resistance	Resistance of Coil	66Ω
Pickup Voltage	Minimum Voltage to Operate Relay	3.75V DC
Dropout Voltage	Maximum Voltage to Release Relay	0.75V DC
Contact Form	Contact Configuration	1C/O (SPDT)
Contact Rating	Maximum Switching Capacity	5A, 250V AC
Contact Resistance	Resistance of Contacts	≤50mΩ
**Insulation Resistance	Insulation Between Contacts and Coil	≥100MΩ at 500V DC
Dielectric Strength	Dielectric Withstand Voltage	1000V AC for 1 min
**Operating Temperature	Temperature Range for Operation	-40°C to +85°C
Storage Temperature	Temperature Range for Storage	-40°C to +85°C
Humidity	Relative Humidity Range	5% to 95% RH
Weight	Weight of Relay	7g
Dimensions	Physical Size	17.5mm x 12.5mm x 10.5mm

Instructions:

1. Installation:

   • Ensure that the relay is mounted on a flat, stable surface.
   • Use the provided terminals to connect the coil and contacts to your circuit.

2. Power Supply:

   • Connect the coil terminals to a 5V DC power supply.
   • Ensure the power supply can provide the required current (0.375W / 66Ω ≈ 56.8mA).

3. Operation:

   • Apply the pickup voltage (3.75V DC) to the coil to activate the relay.
   • The relay will switch the contacts to the normally open (NO) position.
   • To deactivate the relay, reduce the voltage below the dropout voltage (0.75V DC).
   • The relay will return the contacts to the normally closed (NC) position.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Ensure the contacts are clean and free from corrosion.
   • Do not exceed the maximum contact rating (5A, 250V AC) to avoid damage.

5. Environmental Considerations:

   • Store and operate the relay within the specified temperature and humidity ranges.
   • Avoid exposure to extreme temperatures and high humidity to prevent failure.

6. Safety:

   • Always disconnect the power supply before performing any maintenance or installation.
   • Use appropriate safety equipment when handling electrical components.

(For reference only)