Details

---

BUY 74LVC1G53DP,125 https://www.utsource.net/itm/p/12610208.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC		1.65		5.5	V
Input Low Voltage	VI(L)	IIL = 1 渭A			0.8	V
Input High Voltage	VI(H)	IIH = -20 渭A	2.0			V
Output Low Voltage	VO(L)	IO = 4 mA			0.1	V
Output High Voltage	VO(H)	IO = -4 mA	4.5			V
Propagation Delay Time	tpd	VCC = 3.3V, TA = 25掳C		4.7		ns
Power Dissipation	PD				100	mW
Operating Temperature	Toper		-40		85	掳C

Instructions for Use:

1. Supply Voltage: Ensure the supply voltage (VCC) is within the specified range of 1.65V to 5.5V. Exceeding these limits can damage the device.

2. Input Voltages: For proper logic level recognition, input voltages should be below 0.8V for a low signal and above 2.0V for a high signal at the specified currents.

3. Output Levels: When sourcing or sinking current up to 4mA, ensure that output voltages do not exceed the maximum levels specified to avoid incorrect logic states.

4. Propagation Delay: The propagation delay time is crucial for timing considerations in digital circuits. At a typical condition of VCC = 3.3V and ambient temperature of 25掳C, expect a delay of approximately 4.7ns.

5. Power Management: Keep power dissipation under 100mW to prevent overheating and potential failure of the device.

6. Temperature Range: The device is designed to operate reliably between -40掳C and 85掳C. Ensure the operating environment stays within this range.

7. Handling Precautions: Handle the component with care to avoid electrostatic discharge (ESD) damage. Follow standard ESD handling protocols during assembly and testing.

(For reference only)