Details

---

BUY FAN7888 https://www.utsource.net/itm/p/12610214.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	4.5	-	20	V
Control Input High Level	VINH		1.8	-	VCC	V
Control Input Low Level	VINK		-0.3	-	0.8	V
Output Current	IOUT	Continuous	-	1.5	-	A
Propagation Delay	tPD	Rising Edge	-	25	-	ns
Operating Temperature	Toper	Junction	-40	-	150	掳C

Instructions for FAN7888

1. Power Supply Connection:

   • Connect the VCC pin to a power supply between 4.5V and 20V.
   • Ensure proper decoupling capacitors are placed close to the VCC pin to maintain stability.

2. Control Input Configuration:

   • Apply a logic high signal greater than 1.8V (up to VCC) to activate the driver.
   • Apply a logic low signal less than 0.8V to deactivate the driver.

3. Output Handling:

   • The output can provide up to 1.5A continuously.
   • Ensure that the load connected to the output does not exceed this current limit to avoid damage.

4. Timing Considerations:

   • Be aware of the propagation delay of 25ns when designing your timing circuits.

5. Thermal Management:

   • Operate within the temperature range of -40掳C to 150掳C.
   • Use appropriate heat sinking if operating at higher temperatures or under heavy loads.

6. Installation and Handling:

   • Handle with care to avoid static damage.
   • Follow manufacturer guidelines for PCB layout and component placement for optimal performance.

(For reference only)