Details

---

BUY MDP1603-331G https://www.utsource.net/itm/p/12610215.html

Parameter	Value	Unit
Part Number	MDP1603-331G
Type	MOSFET Driver
Input Voltage Range	4.5 to 18	V
Output Current	3.3	A
Quiescent Current	20	渭A
Propagation Delay	150	ns
Operating Temperature	-40 to 125	掳C
Package	SOIC-8
Isolation Voltage	2500	Vrms

Instructions:

1. Power Supply Connection:

   • Connect the input voltage (Vcc) between 4.5V and 18V to the Vcc pin.
   • Ground the GND pin.

2. Input Signal:

   • Apply the control signal to the IN pin. The driver will switch the output based on the logic level of this signal.

3. Output Configuration:

   • Connect the load (e.g., MOSFET gate) to the OUT pin.
   • Ensure the load current does not exceed 3.3A.

4. Thermal Management:

   • Ensure adequate heat dissipation if operating at high temperatures or high current loads.
   • Consider using a heatsink if necessary.

5. Isolation:

   • The driver provides 2500Vrms isolation between the input and output circuits, suitable for high-voltage applications.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight and extreme temperatures.

7. Handling:

   • Handle with care to avoid damage to the pins and package.
   • Use appropriate ESD protection when handling the device.

(For reference only)