Details

---

BUY IKW75N60T https://www.utsource.net/itm/p/12610216.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Collector-Emitter Voltage	VCEO	-	-	600	V	IC = 25 A, Tj = 25掳C
Emitter-Collector Voltage	VECS	-	-	600	V	IC = 25 A, Tj = 25掳C
Gate-Emitter Voltage (Max)	VGE(max)	-	-	卤20	V	-
Continuous Collector Current	IC	-	75	-	A	TC = 25掳C
Continuous Collector Current	IC	-	53	-	A	TC = 100掳C
Pulse Collector Current	ICM	-	200	-	A	tp = 10 ms, IGT = 2 A, Tj = 25掳C
Total Power Dissipation	PTOT	-	-	240	W	TC = 25掳C
Junction to Case Thermal Resistance	Rth(j-c)	-	0.4	-	K/W	-
Junction to Ambient Thermal Resistance	Rth(j-a)	-	60	-	K/W	-
Storage Temperature Range	Tstg	-55	-	150	掳C	-
Operating Junction Temperature Range	Top(j)	-55	-	150	掳C	-

Instructions for Use:

1. Handling and Storage:

   • Store the device in a dry, cool place to avoid moisture damage.
   • Handle the device with care to prevent mechanical damage.

2. Mounting:

   • Ensure proper heat sinking to maintain the junction temperature within the specified limits.
   • Use a thermal interface material (TIM) between the device and the heat sink for efficient heat dissipation.

3. Electrical Connections:

   • Connect the gate and emitter terminals with short leads to minimize parasitic inductance.
   • Ensure that the gate drive circuit can provide the necessary current to charge and discharge the gate capacitance quickly.

4. Overvoltage Protection:

   • Implement overvoltage protection circuits to safeguard against voltage spikes that could exceed the maximum ratings.

5. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed the maximum operating temperature.
   • Use forced air cooling or liquid cooling if necessary to manage heat effectively.

6. Gate Drive:

   • Use a gate resistor to control the switching speed and reduce electromagnetic interference (EMI).
   • Ensure the gate drive voltage is within the specified range to avoid damaging the gate oxide.

7. Safe Operating Area (SOA):

   • Refer to the SOA graph provided in the datasheet to ensure the device operates within safe limits under all conditions.

8. Derating:

   • Derate the continuous collector current as the case temperature increases to ensure reliable operation.

9. Testing:

   • Perform initial testing at low power levels to verify correct operation before moving to higher power applications.

10. Compliance:

    • Ensure compliance with relevant safety and regulatory standards for your application.

(For reference only)