Details

---

BUY TAS5711 https://www.utsource.net/itm/p/12610225.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD		4.5	5.0	5.5	V
Quiescent Current	IQ	No load, VDD = 5V		30		mA
Output Power	POUT	RL = 8惟, THD = 1%, VDD = 5V		2.5		W
Efficiency	畏	POUT = 1W, RL = 8惟, VDD = 5V		85		%
Signal-to-Noise Ratio	SNR	A-weighted, VDD = 5V		95		dB
Total Harmonic Distortion	THD	POUT = 1W, RL = 8惟, VDD = 5V		0.1		%

Instructions for TAS5711

1. Power Supply Requirements:

   • Ensure the supply voltage (VDD) is within the range of 4.5V to 5.5V to avoid damage and ensure optimal performance.

2. Installation:

   • Place the TAS5711 on a suitable PCB with adequate heat dissipation if operating at high power levels.
   • Connect the supply voltage (VDD) and ground (GND) pins carefully to avoid short circuits.

3. Signal Input:

   • Connect the input signal to the designated input pin ensuring it does not exceed the maximum input voltage levels specified in the datasheet.

4. Output Configuration:

   • For optimal performance, connect an 8惟 load to the output. Adjustments may be necessary for different load impedances.

5. Thermal Considerations:

   • Monitor the device temperature during operation. If the device becomes too hot, reduce the load or improve cooling methods.

6. Testing:

   • Before full-scale deployment, test the device under various conditions to ensure stability and performance meet expectations.

7. Safety:

   • Always adhere to safety guidelines when handling electronic components. Use appropriate protective equipment and follow all warnings in the datasheet.

(For reference only)