Details

---

BUY S6020L https://www.utsource.net/itm/p/12610232.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7	-	5.5	V	Operating supply voltage
Output Current	IOUT	-	200	300	mA	Continuous output current
Quiescent Current	IQ	-	1.5	2.5	渭A	Quiescent current at no load
Dropout Voltage	VDROPOUT	-	250	400	mV	Dropout voltage at IOUT = 300 mA
Load Regulation	-	-	1	2	%	Load regulation from 0 to 300 mA
Line Regulation	-	-	0.01	0.02	%/V	Line regulation over operating range
PSRR (1 kHz)	-	-	60	70	dB	Power supply rejection ratio
Operating Temperature	TOPR	-40	-	85	掳C	Operating temperature range
Storage Temperature	TSTG	-65	-	150	掳C	Storage temperature range

Instructions for Use:

1. Supply Voltage:

   • Ensure the input voltage is within the specified range (2.7V to 5.5V) to avoid damage to the device.

2. Output Current:

   • The device can provide a continuous output current of up to 300 mA. Do not exceed this limit to prevent overheating or failure.

3. Quiescent Current:

   • The quiescent current is very low, typically around 1.5 渭A, which makes the S6020L suitable for battery-powered applications.

4. Dropout Voltage:

   • The dropout voltage is the difference between the input and output voltages when the device is operating near its maximum output current. It is typically 250 mV to 400 mV.

5. Load Regulation:

   • The load regulation is the change in output voltage due to changes in load current. It is typically 1% to 2%.

6. Line Regulation:

   • The line regulation is the change in output voltage due to changes in input voltage. It is typically 0.01% to 0.02% per volt.

7. PSRR (Power Supply Rejection Ratio):

   • The PSRR indicates how well the device can reject noise from the input power supply. At 1 kHz, it is typically 60 dB to 70 dB.

8. Operating Temperature:

   • The device can operate over a wide temperature range from -40掳C to 85掳C. Ensure that the ambient temperature does not exceed these limits.

9. Storage Temperature:

   • When storing the device, ensure that the temperature is within the range of -65掳C to 150掳C to prevent damage.

10. Mounting and Handling:

    • Handle the device with care to avoid static discharge and mechanical damage. Follow proper soldering techniques to ensure reliable connections.

11. Circuit Design:

    • Use appropriate capacitors on the input and output to stabilize the device and filter out noise. Typically, a 1 渭F ceramic capacitor on the input and a 1 渭F ceramic capacitor on the output are recommended.

12. Thermal Management:

    • If the device is expected to operate at high currents or in high-temperature environments, consider using a heat sink or providing adequate ventilation to dissipate heat.

By following these guidelines, you can ensure optimal performance and reliability of the S6020L in your application.

(For reference only)