Details

---

BUY LC75386N https://www.utsource.net/itm/p/12610261.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	4.5	5.0	5.5	V	Operating supply voltage
Standby Current	ISB	-	1.0	-	渭A	Current consumption in standby mode
Operating Current	IOP	-	20	-	mA	Current consumption in operating mode
Output Voltage Swing	VOS	-	4.0	-	V	Output voltage swing (VCC to GND)
Input Voltage Range	VIN	0	-	5.5	V	Range of input voltages
Input Leakage Current	IIK	-	1.0	-	渭A	Maximum leakage current at input pins
Output Short-Circuit	ISC	-	-	30	mA	Maximum continuous output short-circuit current
Operating Temperature	TOPR	-40	-	85	掳C	Operating temperature range
Storage Temperature	TSTG	-65	-	150	掳C	Storage temperature range
Thermal Resistance	R胃JA	-	150	-	掳C/W	Junction-to-ambient thermal resistance

Instructions for Using LC75386N

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the specified range of 4.5V to 5.5V.
   • Use a stable power source to avoid voltage fluctuations that can affect performance.

2. Standby Mode:

   • To enter standby mode, set the appropriate control pin to the specified level (usually low).
   • In standby mode, the device consumes minimal current (typically 1.0 渭A).

3. Operating Mode:

   • For normal operation, ensure the device is powered and the control pins are set correctly.
   • The typical operating current is 20 mA.

4. Output Configuration:

   • The output voltage swing is from VCC to GND, providing a full range of output levels.
   • Ensure the load connected to the output is within the maximum short-circuit current limit of 30 mA.

5. Input Handling:

   • The input voltage range is from 0V to 5.5V.
   • Keep input leakage current below 1.0 渭A to maintain optimal performance.

6. Temperature Considerations:

   • The device operates reliably within the temperature range of -40掳C to 85掳C.
   • Store the device in an environment where temperatures do not exceed -65掳C to 150掳C.

7. Thermal Management:

   • The junction-to-ambient thermal resistance (R胃JA) is 150掳C/W.
   • Ensure adequate heat dissipation if the device is expected to operate under high power conditions.

8. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store in a dry, cool place to prevent moisture-related issues.

By following these parameters and instructions, you can ensure the LC75386N operates efficiently and reliably in your application.

(For reference only)