Details

---

BUY CPC1017N https://www.utsource.net/itm/p/12610263.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Supply Voltage	VDD	2.7	-	5.5	V	-
Supply Current	IDD	-	0.1	0.5	mA	VDD = 3.3V, No Load
Input Voltage Range	VIN	0	-	5.5	V	-
Output Voltage Range	VOUT	0	-	5.5	V	-
Maximum Output Current	IOUT	-	100	150	mA	VDD = 5.5V
Operating Temperature	TOP	-40	-	85	掳C	-
Storage Temperature	TSTG	-65	-	150	掳C	-
Quiescent Current	IQ	-	0.1	0.5	mA	VDD = 3.3V, No Load
Output Ripple	VRIPPLE	-	30	50	mV	VDD = 5.5V, 100mA
Load Regulation	-	-	0.5	1.0	%	VDD = 5.5V, 0-100mA
Line Regulation	-	-	0.1	0.5	%	VDD = 2.7-5.5V, No Load

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_DD) is within the range of 2.7V to 5.5V.
   • Connect the supply voltage to the V_DD pin and ground to the GND pin.

2. Input and Output Connections:

   • Connect the input signal to the V_IN pin.
   • Connect the output load to the V_OUT pin.
   • Ensure the output current does not exceed 150mA to avoid damage.

3. Temperature Considerations:

   • The device is designed to operate within the temperature range of -40掳C to 85掳C.
   • Store the device in an environment with temperatures between -65掳C and 150掳C.

4. Load and Line Regulation:

   • The load regulation is typically 0.5% and should not exceed 1.0%.
   • The line regulation is typically 0.1% and should not exceed 0.5%.

5. Quiescent Current:

   • The quiescent current is very low, typically 0.1mA, and should not exceed 0.5mA under no-load conditions.

6. Output Ripple:

   • The output ripple is typically 30mV and should not exceed 50mV under a 100mA load.

7. Supply Current:

   • The supply current is typically 0.1mA and should not exceed 0.5mA under no-load conditions.

8. Handling and Storage:

   • Handle the device with care to avoid static discharge.
   • Store the device in a dry and cool place to prevent moisture damage.

9. Testing:

   • Before using the device in a final application, test it under typical operating conditions to ensure it meets the required specifications.

10. Compliance:

    • Ensure that the device complies with all relevant safety and regulatory standards for your application.

(For reference only)