Details

---

BUY M53204 https://www.utsource.net/itm/p/12610279.html

Parameter	Description	Value	Unit
Operating Voltage	Supply voltage range	2.7 to 5.5	V
Operating Current	Active current	10	渭A
Standby Current	Current in standby mode	0.5	渭A
Output Current	Maximum output current per I/O pin	20	mA
Input Voltage	Maximum input voltage	VCC + 0.3	V
Operating Temp.	Operating temperature range	-40 to +85	掳C
Storage Temp.	Storage temperature range	-65 to +150	掳C

Instructions for M53204

1. Power Supply Connection:

   • Connect the VCC pin to a power supply within the operating voltage range (2.7V to 5.5V).
   • Ensure GND is properly grounded.

2. Input Handling:

   • Do not apply voltages higher than VCC + 0.3V to any input pins to avoid damage.
   • Use appropriate pull-up or pull-down resistors if necessary.

3. Output Configuration:

   • Limit the current drawn from each I/O pin to no more than 20mA to prevent overheating or damage.
   • Consider using external buffers or drivers for loads requiring higher currents.

4. Standby Mode:

   • To enter standby mode, set the appropriate control signal as specified in the datasheet.
   • Monitor the standby current to ensure it remains within the specified limit of 0.5渭A.

5. Temperature Management:

   • Operate the device within the specified operating temperature range (-40掳C to +85掳C).
   • Store the device within the storage temperature range (-65掳C to +150掳C) when not in use.

6. Handling and ESD Protection:

   • Handle with care to avoid electrostatic discharge (ESD) which can damage sensitive components.
   • Use proper ESD protection measures such as wrist straps and conductive packaging.

(For reference only)